Dewalt DW088LR Instruction Manual - Page 3

Warning Labels EN For your convenience and safety, the following labels are on your laser. User Manual  WARNING: To reduce the risk of injury, user must read instruction manual.≤1.5mW@510-530nm 5002595 IEC 60825-1: 2014 Contents WARNING: LASER RADIATION. DO NOT STARE INTO BEAM. Class 2 LasVeisruaPlrRoedsuultct • Safety • Product Overview • Batteries and Power ≤1.5mW @ 510-530nm IEC 60825-1: 2014 5002595 ≤1.5mW @ 630-680nm IEC 60825-1: 2014 5002595 • Operation • Accuracy Check and Calibration Visual Result Visual Result • Specifications • Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power User Safety tools create sparks which may ignite the dust or fumes. 5002595 • Use the ≤1.5mW @ 630-680nm IEC 60825-1: 2014 laser only with the specifically designated batteries. Use of any other batteries may create a risk of fire. WARNING: • Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire • and/or serious personal injury. Store idle laser out of reach of children and other untrained peVirssuaol nRessu. lLt asers are dangerous in the hands of untrained users. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one laser, may create a risk of injury when used on another laser. WARNING: • Tool service must be performed only by qualified repair Laser Radiation Exposure. Do not disassemble or personnel. Service or maintenance performed by unqualified modify the laser level. There are no user serviceable personnel may result in injury. To locate your nearest DeWALT parts inside. Serious eye injury could result. service center call 1-800-4-DEWALT (1-800-433-9258) or go to http://www.dewalt.com on the Internet. WARNING: • Do not use optical tools such as a telescope or transit to Hazardous Radiation. Use of controls or view the laser beam. Serious eye injury could result. adjustments or performance of procedures other than those • Do not place the laser in a position which may cause specified herein may result in hazardous anyone to intentionally or unintentionally stare into the radiation exposure. laser beam. Serious eye injury could result. • Turn the laser off when it is not in use. Leaving the laser on CAUTION: • LASER RADIATION - DO NOT STARE INTO THE LASER BEAM. Class 2 Laser Product. • increases the risk of staring into the laser beam. Do not disassemble the laser tool. There are no user serviceable parts inside. Do not modify the laser in any way. Modifying the tool may • The label on your tool may include the following symbols. V volts mW milliwatts Ah Ampere Hours result in Hazardous Laser Radiation Exposure. • Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result. • Do not remove or deface warning labels. Removing labels increases the risk of exposure to radiation. laser warning symbol • Position the laser securely on a level surface. Damage to the nm wavelength in nanometers laser or serious injury could result if the laser falls 2 Class 2 Laser Do not stare into the laser beam. 4 Laser Information • The DW088LR and DW088LG Laser Levels are Class 2 laser products and comply with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007. • The DW088LR and DW088LG lasers are self-leveling laser tools that can be used inside and outside for horizontal (level), vertical and plumb alignment projects. Figure 3 - Magnetic pivot bracket G Figure 3 - Keyhole slot H Figure 5A - Tripod thread fitting (1/4 - 20 & 5/8-11) I Figure 5A - Ceiling Mount J Conforms to UL STDS 61010-1 & 2595 Certified to CSA STD C22.2 No. 61010-1 Figure 5A - Clamp K WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious personal injury. Figure 5A - Screw Hole M Batteries and Power Work Area • Keep your work area clean and well lit. Cluttered benches and dark • This tool is powered by the following DeWALT 12V Battery packs: areas invite accidents. DCB120, DCB127 or may also be powered using the DEWALT AA • Do not operate laser tools in explosive atmospheres, such as in the Starter pack which can carry 4 x AA batteries. Note: The AA starter presence of flammable liquids, gases, or dust. pack is recommended only for use with the red laser • Keep bystanders, children, and visitors away while operating a laser tool. Distractions can cause you to lose control Battery Installation / Removal Electrical Safety (See figure 3 ) • Use battery operated tool only with the specifically designed batteries. Use of any other batteries may create a Using the AA Starter Pack: risk of fire. CAUTION: The AA starter pack is designed specifically for use only Product Overview with the DeWALT 12V compatible laser products and cannot be used with any other tools Do not attempt to modify WARNING: Never modify the tool or any part of it. Damage to the laser or personal injury could result. Figure 3 - Battery Interface A the product. To install batteries: • Lift up the battery compartment cover as shown in Figure 4 . • Insert four fresh AA batteries in the compartment, placing Figure 2 - Pendulum Lock B the batteries according to (+) and (-) on the inside of the compartment. • Install the AA starter Battery pack as shown in Figure 2 - Keypad C Figure 3 . Figure 5B - ON/OFF button: horizontal laser line D Figure 5B - ON/OFF button: vertical laser line E Figure 5B - Battery Meter F Using the 12V DEWALT Rechargeable Pack: • Install the 12V Battery pack as shown in Figure 3 . WARNING: Batteries can explode, or leak, and can cause injury or fire. To reduce this risk: 5