Dewalt DWE46266N Instruction Manual 1 - Page 16

English ACCESSORIES CHART 5" (125 mm) and 6" (150 mm) Grinding Wheels Wire Wheels Type 27 guard* unthreaded backing flange Type 27 depressed center wheel threaded locking flange Type 27 guard* Type 27 guard* Type 27 hubbed wheel 3 - 5" (76.2 - 127 mm) wire cup brush 5" (125 mm) and 6" (150 mm) Sanding Flap Discs Type 27 guard* Type 27 guard* unthreaded backing flange hubbed sanding flap disc non-hubbed sanding flap disc threaded locking flange 5" (125 mm) and 6" (150 mm) Cutting Wheels Type 27 guard* 4"-6" (100-150 mm) wire wheel Sanding Discs rubber backing pad sanding disc sanding clamp nut Type 1/41 guard* unthreaded backing flange Type 27/42 depressed center wheel, cutting only OR Type 1/41 guard* unthreaded backing flange OR Type 1/41 guard* unthreaded backing flange threaded locking flange Type 1/41 abrasive cutting wheel diamond cutting wheel threaded locking flange threaded locking flange Type 1/41 guards are intended for use with Type 1/41 cutting wheels and Type 27 wheels marked for cutting only. Grinding with wheels other than Type 27 and Type 29 require different accessory guards. Always use the smallest proper guard possible that does not contact the accessory. * NOTE: A Type 27 or traditional Type 1/41 guard is available at extra cost from your local dealer or authorized service center. 14