Dirt Devil M087700 Manual - Page 10
Lightbulb, Removal, Replacement
View all Dirt Devil M087700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
BELT OR BRUSH REMOVAL & REPLACEMENT CONTINUED TO REPLACE BELT OR BRUSHROLL 4. MOTOR SHAFT 5. END CAP 0 0 Slide belt onto motorshaft. a Place new belt in area of brushroll without bristles. 6a. With new belt in place, pull and slide brushroll into nozzle making sure that the brushroll end caps are in the correct orientation (6a inset). Rotate brushroll manually to make sure belt is properly aligned. Reattach nozzle guard. Replace all five (5) screws to secure nozzle guard. LIGHTBULB REMOVAL AND REPLACEMENT WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK - UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB. This cleaner uses a common automotive lamp #906, 13.0 volts. For bulb replacement call 1-800-3211134 or your local auto parts store. TOOL REQUIRED:SMALL PHILLIPS HEAD SCREWDRIVER 2. 0 Lean cleaner handle back Remove the two (2) screws ocated on either side of the headlight lens. Pull bulb out of socket to remove. Do NOT twist. Gently push bulb into socket to replace. Secure the headlight lens by replacing the two (2) screws. 10