Dynex DX-24L150A11 User Manual (English) - Page 8

TV components Installing a wall-mount bracket To install a wall-mount bracket: 1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched. 2 Remove the four screws that secure the TV to the base. 3 Remove the four screws holding the stand column to the TV, then remove the stand column. Front DX-24L150A11 5 12 Stand column 4 Secure the wall-mount bracket to the back of your TV using the four M4 screws provided with the bracket. TV components Accessories Make sure the following accessories are included in the box with your TV: • Remote control • Component video cable • Audio cable • AC power cord • AAA batteries (2) • Stand • Quick Start Guide Item Name 1 Remote control sensor 2 Power indicator Description Receives signals from the remote control. Do not block. For more information, see "Aiming the remote control" on page 8. Lights blue when your TV is turned on. Lights red when your TV is in standby mode. Side Item Name 1 CH / CH 2 VOL+ / VOL3 MENU 4 INPUT 5 (power) Description In TV mode, press to select the next or previous channel. In menu mode, press to move up or down. In TV mode, press to increase or decrease the volume. In menu mode, press to move right or left or to adjust menu settings. Press to open the on-screen menu. Press to open the INPUT SOURCE menu. For more information, see "Selecting the video input source" on page 13. Press to turn on the TV or put the TV in standby mode. Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power.