Dynex DX-32L100A13 User Manual (English) - Page 40

36 DX-32L100A13 Specifications Problem Solution After Auto Channel Search, there are no channels One or more channels do not display. Password is lost. • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure the antenna or cable/satellite box is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. • Make sure that the channels are not blocked. See "Setting parental control levels" on page 25. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" on page 22. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" on page 24. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" on page 24. Some settings cannot be accessed. • If a setting is grayed, the setting is not available in the current video input mode. TV cabinet creaks. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. Control buttons do not work TV keeps turning off • Make sure that the Button Lock option is set to No. See "Locking control buttons" on page 25. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" on page 29. Note If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Specifications Specifications are subject to change without notice. Warranty DX-32L100A13 Parts: 1 year Labor: 1 year Dimensions and weight Screen DX-32L100A13 Without stand: 31.0 × 4.4 × 19.5 in. (78.65 × 11.09 × 49.55 cm) With stand: 31.0 × 9.1 × 21.5 in. (78.65× 23.18 × 54.65 cm) Without stand: 18.01 lbs. (8.2 kg) With stand: 19.41 lbs. (8.6 kg) DX-32L100A13 Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution Panel resolution Aspect ratio Contrast ratio (typical)-panel Dynamic contrast ratio - list value Brightness (center typical) cd/m2 Comb filter Response time Horizontal viewing angle Vertical viewing angle Display resolutions/VGA scan rates 31.5" LCD 60Hz 720p 1366 (H) × 768 (V) 16:9 3000:1 6000:1 300 nits 3d y/c digital 8 ms 160 160 DX-32L100A13 HDMI 1.3 Component video PC/VGA Tuner Suggested Resolutions: 1080p, 1080i, 720p, 480p, 480i Suggested Resolutions: 1080i, 720p, 480p, 480i Suggested scan rates: 640 × 480/60Hz, 800 × 600/60Hz, 1024 × 768/60Hz, 1360 × 768/60Hz DX-32L100A13 Analog Digital NTSC ATSC, 8-VSB, Clear-QAM