Dynex DX-32L130A10 User Manual (English) - Page 12

Making connections DX-32L130A10 9 Connecting an antenna, cable TV, or satellite TV box Important: The antenna connector should only be finger-tightened. Do not tighten this connector with any tool, or you may damage your TV. To connect an antenna, cable TV, or satellite TV box: 1 Turn off the TV before connecting the antenna. 2 Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna or on the cable or satellite TV box. If you are using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided). ANT/CABLE IN jack (on the side of the TV) 3 Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV. Antenna, cable TV, or satellite box Side of TV HEADPHONE SERVICE VHF, UHF, or combination antenna RF coaxial cable (75 ohm) VHF antenna RF coaxial cable (75 ohm) Twin-lead flat cable UHF antenna 300-75 ohm Adapter (not provided) Home antenna terminal (75 ohm) Twin-lead flat cable Combiner (not provided) Notes: Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. If the antenna is not installed correctly, contact qualified service personnel to correct the problem. Connecting a VCR To connect a VCR: 1 Make sure that your TV's power cord is unplugged and the VCR is turned off. 2 Connect an AV cable to the AV VIDEO and AUDIO out jacks on the VCR. RF coaxial cable (75 ohm) RF coaxial cable (75 ohm) Side of TV Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white. Cables may be separate or combined. AV cable S-VIDEO HEADPHONEḤḤḤḤSERVICE ḤḤR VIDEOḤḤḤ L