Dynex DX-32L130A10 User Manual (English) - Page 15
Connecting a computer, Connecting headphones, Connecting an external sound system
View all Dynex DX-32L130A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
12 DX-32L130A10 Making connections Connecting a computer Tip: Some computers have an HDMI connector, which can be used for a better picture. To connect a computer: 1 Make sure that your TV's power cord is unplugged and the computer is turned off. 2 Connect a VGA cable to the VGA jack on the computer, then connect the other end of the cable to the VGA jack on the back of your TV. Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable. Audio cable (stereo mini plugs) ḤḤR Connecting headphones To connect headphones: • Connect your headphones to the HEADPHONE jack on the side of your TV. S-VIDEO HEADPHONEḤḤḤḤ Side of TV Headphones VIDEOḤḤḤ L HDMI2 HDMI1 AUDIO OUT ḤḤḤL ḤR L R COMP1 Y PB PRḤḤḤḤL R COMP2 Back of TV VGA cable Computer 3 Connect an audio cable to the AUDIO OUT jack on the computer, then connect the other end of the cable to the VGA AUDIO IN jack on the back of your TV. Note: The audio cable should have a stereo mini plug. To play video from a computer: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select VGA, then press ENTER. 3 Turn on the computer, then adjust the display properties, if necessary. Note: Loud noise can damage your hearing. When using headphones, use the lowest volume setting that still lets you hear the sound. Connecting an external sound system To connect an external audio device: 1 Make sure that your TV's power cord is unplugged and the component video device is turned off. 2 Connect an analog audio (L and R) cable to the Audio Out (L/R) jacks on the back of your TV. - OR - Connect a digital coaxial cable to the DIGITAL OUTPUT jack on the side of your TV. HDMI2 HDMI1 AUDIO OUT ḤḤḤL ḤR HDMI1 SERVIḤCḤḤE ḤḤ L R COMP1 Y PB PRḤḤḤḤL R COMP2 Analog audio cables Back of TV VIDEOḤḤḤ L ḤḤR O S-VHIDEEADP Side of TV Digital optical (Toslink) audio cable Stereo Digital amplifier 3 Connect the other end of the analog audio (L and R) cable to the AUDIO IN jacks on the analog stereo receiver. - OR - Connect the other end of the digital coaxial cable to the DIGITAL INPUT jack on the digital amplifier. To play audio from a digital sound system: 1 Turn on your TV. 2 Turn on the external audio device and set it to the correct output mode. See the audio device's user guide for more information.