Dynex DX-32L130A10 User Manual (English) - Page 14

Making connections DX-32L130A10 11 Connecting a component video device A component (Y, Pb, Pr) picture can be displayed only when a 480i, 480P, 720P, or 1080i signal is received. To connect a component video device: 1 Make sure that your TV's power cord is unplugged and the component video device is turned off. 2 Connect a component video cable to the COMPONENT OUT jacks on the component video device. HDMI2 HDMI1 AUDIO OUT ḤḤḤL ḤR VGA AUDIO IN VGA L R COMP1 Y PB PRḤḤḤḤLḤL RR COMP2 Back of TV Note: Cables are often color-coded to connectors. Y = Green cable Pb = Blue cable Pr = Red cable Connecting an S-video device To connect an S-video device: 1 Make sure that your TV's power cord is unplugged and the S-Video device is turned off. 2 Connect an S-Video cable to the S-VIDEO OUT jacks on the S-Video device. Side of TV S-video cable Audio cable S-VIDEO ḤḤR VIDEOḤḤḤ L VIDEOḤḤḤ L ḤḤR S-VIDEO Component video cable Component video devices 3 Connect the other end of the component video cable to the COMP1 or COMP2 jacks on the back of your TV. 4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device. 5 Connect the other end of the audio cable to the COMP1 or COMP2 audio jacks on the back of your TV. To play from a component device: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select COMP1 or COMP2, then press ENTER. 3 Turn on the component video device and set it to the correct output mode. See the component video device's user guide for more information. S-video device 3 Connect the other end of the S-video cable to the S-VIDEO jack on the side of your TV. 4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device. 5 Connect the other end of the audio cable to the AV audio jacks on the back of your TV. To play from a component device: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select S-VIDEO, then press ENTER. 3 Turn on the S-video device and set it to the correct output mode. See the S-video device's user guide for more information.