Dynex DX-32L150A11 FAQs (English) - Page 2

 If you are using cable connected directly to the TV: 1. Press MENU. The on-screen menu opens. 2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens. 3. Press ◄ or ► to select Cable. 4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box opens. 5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan.  If you are using an antenna: 1. Press MENU. The on-screen menu opens. 2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens. 3. Press ◄ or ► to select Antenna. 4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box opens. 5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan. 2. I am programming my universal remote, what code is needed?  Use the following table to obtain the correct remote code: o Note: The brand name is often visible on the front of the universal remote control, and the model number is often visible on the back. o Note: If the universal remote control isn't listed in the chart, refer to your universal remote control's instructions and try codes for other brands Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. Dynex TV codes for universal remote controls (for all Dynex TVs manufactured after Jan. 1, 2007) Universal remote control manufacturer and model Philips RCA One for Sony PHDVD5, RCU807 All RM-VL600 PH5DSS, URC- PMDVR8, 6690 PDVR8 115 135 0464 8043 Set-top box manufacturer and model Comcast Dish Motorola TIVO DirecTV M1057 Network DRC800 Series 3, HD RC23 VIP508, VIP622 0463 720 0463 0091 10463 o Codes for other universal remotes are available online at: http://www.dynexproducts.com/universalcontrolcodes.aspx  Follow your universal remote control's instructions to enter the code. 2