Dynex DX-32L150A11 FAQs (English) - Page 3

3. How do I hook up my external device (e.g., cable/satellite box, Blu-ray/DVD player, Game System, VCR, etc.)?  Have you tried using your quick start guide to help you through this process? If more help is needed please follow the steps below.  What type of cable are you using? o HDMI Cable 1. Connect an HDMI cable to the HDMI jack on the back or side of your TV and to the HDMI Out jack on the HDMI device. 2. To play from an HDMI device: a. Turn on your TV, then press HDMI. b. Turn on the HDMI device, then set it to the correct mode. See the documentation that came with the device for further instructions. o Component Video Cables are red, green and blue. The audio cables are red and white. 1. Connect a component video cable and audio cables to the COMPONENT IN jacks on the back of your TV and to the COMPONENT Out jacks on the component device. 2. To play from a component video device: a. Turn on your TV, then press COMP. b. Turn on the component video device, then set it to the correct mode. See the documentation that came with the device for further instructions. o S-Video Cables are round with 4 pins in the middle. The audio cables are red and white. 1. Connect an S-Video cable to the S-VIDEO jack on the back of your TV and to the SVideo Out jack on the S-Video device. 2. Connect an audio cable to the L AUDIO and R AUDIO jacks on the back of your TV and to the Audio Out jacks on the S-Video Device. 3. To play from an S-Video device: a. Turn on your TV, then press VIDEO to select S-Video. b. Turn on the S-Video device, then set it to the correct mode. See the documentation that came with the device for further instructions. o A/V Cables (RCA Cables, Composite Cables) have a yellow video cable, and red and white audio cables. 1. Connect A/V cables to the AV IN jacks on the back or side of your TV and to the AV Out jacks on the A/V device. 2. To play from an A/V Device: a. Turn on your TV, then press VIDEO to select AV. b. Turn on the A/V device, then set it to the correct mode. See the documentation that came with the device for further instructions. 4. How do I set up my channels or run an autochannel search?  Are you using a cable/satellite box, cable connected directly to the TV, or an antenna? o If you are using a cable or satellite box you must use the remote that came with that box to change channels.  Make sure you have the correct input selected to view channels via the cable or satellite box. For example, if the cable or satellite box is connected via component cables please press the COMP button on your remote to select Component to view your channels. o If you are using cable connected directly to the TV: 1. Press MENU. The on-screen menu opens. 2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens. 3. Press ◄ or ► to select Cable. 4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box opens. 5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan. o If you are using an antenna: 1. Press MENU. The on-screen menu opens. 2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens. 3. Press ◄ or ► to select Antenna. 4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box opens. 5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan. 3