Dynex DX-32L150A11 FAQs (English) - Page 7

Audio Issues, General - mount

Page 7 highlights

either too far from a tower or with too many obstacles in the way-you'll see a black screen that says "No signal."  Reception can vary by channel, depending on the location and broadcast power level of a given station.  Make sure your antenna is connected securely to the TV.  Use a basic indoor set-top antenna designed to pick up both VHF and UHF. OR Use a set-top antenna that has a built-in signal amplifier. OR Use an antenna mounted on your roof or in your attic  For more information about antennas and the available channels in your area, visit www.antennaweb.org Audio Issues 10. I have no sound or my sound has static noise.  Check volume levels.  Make sure the TV volume is not muted.  Make sure headphones are not connected to the headphone jack.  Make sure your connections are connected correctly to the jacks on the TV and on the external devices.  Check the signal strength of the digital channels. It is possible you are receiving marginal reception. Both the picture and sound may freeze or break up due to poor reception. 1. Press CH ^ or CH v to select the channel you want and to view the selected channel strength. 2. Press MENU. The on-screen menu opens. 3. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens. The DTV signal strength is shown at the bottom of the menu. 4. Move the antenna around the room or close to a window. Check the signal strength of the digital channels again. The optimal location may vary by channel. 5. Press EXIT to close the menu.  The audio cables you are using may be bad, try a new set. 11. How do I turn on/off closed captioning?  Press the CCD button on the remote to select On or Off.  Advanced closed captioning settings can be found in the Menu under Setup. General 12. My TV did not come with a manual.  The manual is available on the Dynex website. o DX-26L150A11  http://dynexproducts.com/cms/documents/DX-26L150A11_100346_WEB_ENG_V3_Final%20lr.pdf o DX-32L150A11, DX-37L150A11, and DX-46L150A11  http://dynexproducts.com/cms/documents/DX-32L-37L-46L150A11_100012_WEB_ENG_V4_Final%20lr.pdf 13. Can I get more information about this TV?  DX-26L150A11 o http://dynexproducts.com/products/televisions/DX-26L150A11.html  DX-32L150A11 o http://dynexproducts.com/products/televisions/DX-32L150A11.html  DX-37L150A11 o http://dynexproducts.com/products/televisions/DX-37L150A11.html  DX-46L150A11 o http://dynexproducts.com/products/televisions/DX-46L150A11.html 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

7
either too far from a tower or with too many obstacles in the way—you'll see a black
screen that says "No signal."
Reception can vary by channel, depending on the location and broadcast power level
of a given station.
Make sure your antenna is connected securely to the TV.
Use a basic indoor set-top antenna designed to pick up both VHF and UHF.
OR
Use a set-top antenna that has a built-in signal amplifier.
OR
Use an antenna mounted on your roof or in your attic
For more information about antennas and the available channels in your area, visit
www.antennaweb.org
Audio Issues
10. I have no sound or my sound has static noise.
Check volume levels.
Make sure the TV volume is not muted.
Make sure headphones are not connected to the headphone jack.
Make sure your connections are connected correctly to the jacks on the TV and on the external devices.
Check the signal strength of the digital channels. It is possible you are receiving marginal reception.
Both
the picture and sound may freeze or break up due to poor reception.
1. Press
CH ^
or
CH v
to select the channel you want and to view the selected channel strength.
2. Press
MENU
. The on-screen menu opens.
3. Press
or
to highlight
Channel
, then press
. The
Channel
menu opens. The DTV signal
strength is shown at the bottom of the menu.
4.
Move the antenna around the room or close to a window. Check the signal strength of the
digital channels again. The optimal location may vary by channel.
5. Press
EXIT
to close the menu.
The audio cables you are using may be bad, try a new set.
11. How do I turn on/off closed captioning?
Press the
CCD
button on the remote to select On or Off.
Advanced closed captioning settings can be found in the Menu under Setup.
General
12. My TV did not come with a manual.
The manual is available on the Dynex website.
o
DX-26L150A11
http://dynexproducts.com/cms/documents/
DX-26
L150A11_10-
0346_WEB_ENG_V3_Final%20lr.pdf
o
DX-32L150A11, DX-37L150A11, and DX-46L150A11
http://dynexproducts.com/cms/documents/DX-32L-37L-46L150A11_10-
0012_WEB_ENG_V4_Final%20lr.pdf
13. Can I get more information about this TV?
DX-26L150A11
o
http://dynexproducts.com/products/televisions/
DX-26
L150A11.html
DX-32L150A11
o
http://dynexproducts.com/products/televisions/DX-32L150A11.html
DX-37L150A11
o
http://dynexproducts.com/products/televisions/DX-37L150A11.html
DX-46L150A11
o
http://dynexproducts.com/products/televisions/DX-46L150A11.html