Dynex DX-60D260A13 User Manual (English) - Page 14

10 DX-60D260A13 Making connections Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI1/DVI jack to connect a cable or satellite box using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. To connect a cable or satellite box using DVI: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI1/DVI jack on the side of your TV. Cable or satellite box Using component video (better) To connect a cable or satellite box using component video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR video jacks on the side of your TV and the component video out jacks on the cable or satellite box. Cables are often color-coded to match color-coded jacks. Cable or satellite box 3.5 mm audio cable HDMI cable with HDMI-DVI adapter Audio cable Component video cable Side of TV 5 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the side of your TV and to the AUDIO OUT jacks on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Press INPUT to open the INPUT SOURCE list. 8 Press or to highlight HDMI 1, then press ENTER. Side of TV 4 Connect an audio cable (not provided) to the AV IN AUDIO L/R jacks on the side of your TV and to the audio out jacks on the cable or satellite TV box. Note • • The VIDEO/Y, PB, and PR video jacks (used to connect a component device) share the AV IN AUDIO L/R jacks with the VIDEO/Y jack (used to connect a composite device). When you connect the audio using the AV IN AUDIO L/R jacks, the audio output is analog. 5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Press INPUT to open the INPUT SOURCE list. 7 Press or to highlight COMPONENT/AV then press ENTER.