Dynex DX-60D260A13 User Manual (English) - Page 23

Turning on your TV for the first time DX-60D260A13 19 Aiming the remote control To aim the remote control: • Point the remote control towards the remote sensor on the front of your TV. Turning on your TV for the first time The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, time setting, picture mode, and TV signal source. To set up your TV: 1 Make sure that you have: • Installed the remote control batteries. (See page 18 for details.) • Connected an antenna, cable TV, or satellite TV. (See page 9 through 11 for details.) • Connected the power cord. (See page 9 for details.) 2 Press (power) to turn on your TV. The Choose Your Menu Language screen opens. 6 If you selected Auto for Style, press or to highlight Daylight Savings, then press or to select On (if your viewing area observes Daylight Savings Time) or Off (if your viewing area does not observe Daylight Savings Time). 7 If you selected Manual for Style, set the date by pressing or to highlight Year, Month, or Day, then pressing or to adjust the setting. 8 If you selected Manual for Style, set the time by pressing or to highlight Time, then pressing or to select the hour, minute, or AM/PM field. Press or to adjust the setting. 9 Press ENTER. The Choose Your Picture Mode screen opens. 10 Press or to highlight Home Mode or Retail Mode, then press ENTER. If you selected Retail Mode, a message asks you to confirm your selection. Retail Mode is not an energy savings mode. Select Yes to continue using Retail Mode, or select No to change your selection, then press ENTER. The Choose Your TV Source screen opens. 3 Press or to highlight the language you want, then press ENTER. The Choose Your Time Setting screen opens. 4 Press or to highlight Style, then press or to select Manual (to set the date and time manually) or Auto (to set the date and time automatically from a TV signal source based on the time zone you select). Note If you select Auto, the displayed time will be incorrect until your TV gets the correct time from a TV signal source. 5 If you selected Auto for Style, press or to highlight Time Zone, then press or to select your time zone. You can select Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Newfoundland, or Atlantic. 11 Press or to highlight Antenna, Cable, or Cable/Satellite Box, then press ENTER. • If you select Antenna or Cable, your TV scans for available channels. The scan may take several minutes. • If you select Cable/Satellite box, your TV does not need to scan for channels: • During antenna scanning, your TV searches for digital channels first. When the digital channel search is complete, a message appears asking if you want to search for analog channels. Select Yes to continue searching for analog channels, or select No to stop searching for channels. Note The channel scan can take up to 20+ minutes. You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list. 12 To watch TV, press INPUT, press or to highlight the video input source for your TV in the INPUT SOURCE list, then press ENTER.