Dynex DX-CRD12 User Guide - Page 7
System board connector - install
UPC - 600603109041
View all Dynex DX-CRD12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installing the card reader 7 Pin Cable color Function P2 White D- P1 Red VBUS System board connector Caution: Electrostatic discharge (static electricity) can damage electronic components. Make sure that you are correctly grounded before you install your card reader. Turn off your computer, then touch a bare metal part of your computer, such as the back of the chassis or power supply, to discharge any static electricity. To install your card reader: 1 If you are installing your card reader into a computer running Windows 98SE, install the driver before installing your card reader. For more information, see "Windows 98SE and Windows ME" on page 9. 2 Make sure that you are correctly grounded by touching a bare metal part of your computer, such as the back of the chassis or power supply. 3 Turn off your computer and disconnect the power cord. 4 Open your computer's cover. For more information, see the documentation that came with your computer. 5 Make sure that your computer's system board corrector is compatible with your card reader's USB connector. For more information, see "USB pin cable assignment" on page 6. 6 Carefully slide your card reader into the empty drive bay.