Dyson DC14 User Guide - Page 6

18690_DC14_US_OPS_MAN 8/23/07 9:53 AM Page 6 Using your DC14 Using your DC14 B D WARNING • The machine is intended for domestic use only. • Fine dust such as plaster dust or flour should only be vacuumed in very small amounts. CAUTION • Do not press the cyclone release button while carrying the machine, or it could fall and cause injury. • Ensure the cyclone pack is secured to the machine. • Do not shake the machine while carrying, or it could fall and cause injury. • Keep hair and loose fabrics away from wand cap when machine is on. • Use machine in bare floors mode for bare or delicate flooring, rugs, and carpets. • Ensure the machine is in an upright position before adjusting the setting. A A B A C After plugging machine into electric outlet, press on/off button A, push cleaner head down with foot and pull handle towards you. Brush control system A Bare floors: Use this setting to stop brushbar from turning when vacuuming bare or delicate flooring, rugs, and carpets. B Carpets: Use this setting so brushbar turns when vacuuming non-delicate surfaces. tip The brushbar will not turn until you tilt the handle backwards to begin vacuuming. Tools A Push back wand cap. B Pull wand from inside wand handle until it clicks into place. C Press button to release hose and wand handle from machine. D To push wand back inside hose, ensure hose is straight. Press the same wand release button and push wand back inside wand handle. Consult your flooring manufacturer's recommended instructions before vacuuming and caring for your flooring, rugs, and carpets. Some carpets will fuzz if a rotating brushbar is used when vacuuming. If this happens, we recommend vacuuming in bare floors mode and consulting with your flooring manufacturer. 6 Dyson Helpline contact us at 1-866-693-9766