E-Z-GO Express L6 - Electric Owner Manual - Page 27
Model: Express L6, Type: Electric Powered Personnel Carrier, Model Year: 2012, Part No: 618867
View all E-Z-GO Express L6 - Electric manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
GENERAL SPECIFICATIONS Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. MODEL: EXPRESS L6 2 TYPE: ELECTRIC POWERED PERSONNEL CARRIER MODEL YEAR: 2012 Part No: 618867 PRODUCT SPECIFICATION CONFIGURATION HIGHLIGHTS Precision Drive System™ (PDS): Factory programmable to application Solid State continuously variable seperately excited speed controller Eight, 6 Volt Deep Cycle Dash mounted direction selector switch (Forward-Neutral-Reverse) Full torque, reduced speed reverse Anti-roll back, walkaway braking and alarm Anti-stall motor protection Regenerative 'Pedal Down' and/or 'Pedal Up' braking Inductive throttle sensor Diagnostic indicator Factory selectable performance options Battery Charger: Delta Q, 48 VDC. H120/230 VAC 50/60 Hz. Underwriters Laboratories (U.L.) Listed, (C.S.A. Certified) Motor: 48 volt DC shunt wound, brazed armature, solid copper windings. Non-vented 15.2 hp (11.3 kW) at 1600 rpm (1hour) Drive Train: Direct motor shaft connected to transaxle pinion shaft Electrical System: 48 Volt DC, eight, 6 volt deep cycle storage batteries (107 minute, 225 amp-hour @ 20 hr. discharge rate) Transaxle: Differential with helical gears Brakes: Dual rear wheel mechanical self-adjusting drum brakes. Automatic single point park brake release with self-compensating system. Capacity: Choice of 6 seats (Std) or 4 seats and optional Wood Stake Sides or Roto-molded Cargo box. Cargo Bed: Roto-molded cross-linked polyethelene. Removable hinged multi-position tailgate requires no latch mechanism. PRODUCT OVERVIEW Dimensions Performance Overall Length Overall Width 138.0 in (351.0 cm) 46.5 in (119.0 cm) Overall Height (No Canopy) 52.5 in (133.5 cm) (Top of steering wheel) Overall Height (With Canopy) 76.0 in (193.0 cm) Wheel Base 95.0 in (241.0 cm) Front Wheel Track 37.5 in (95.0 cm) Rear Wheel Track 38.5 in (98.0 cm) Gnd Clearance @ Differential 7.0 in (18.0 cm) Seating (Rear Facing Seat) 6 Person Seating (Bed/Stake sides) 4 Person Dry Weight Curb Weight 720.0 lb (325.0 kg) (Without Batteries) 1210.0 lb (545.0 kg) Vehicle load capacity 1198.0 lb (540.0 kg) Outside Clearance Circle 25.5 ft (7.8 m) Intersecting Aisle Clrnce 6.5 ft (1.98 m) Speed (Level Ground) 16.0 mph ± 0.5 mph (26.0 kph ± 0.8 kph) Towing Capacity N/A Steering & Suspension Vehicle Power Power Source 48 Volts DC Motor Type Shunt Wound Continuous Horsepower (kW) 2.5 hp (1.9 kW) Intermittent Horsepower (kW) 18.1 hp (13.5 kW) @ 1900 rpm Electrical System 48 Volt Batteries (Qty, Type) Eight, 6 Volt Deep Cycle Key or Pedal Start Battery Charger Pedal Start 48 VDC Delta Q, 120/230 VAC, Speed Controller UL & CSA 400 Amp Precision Drive System (PDS) Steering Front Suspension Rear Suspension Service Brake Parking Brake Front Tires Rear Tires Body & Chassis Frame Front Body & Finish Rear Body & Finish Seat Pod Standard Color Self-compensating rack and pinion Leaf springs with hydraulic shock absorbers Leaf springs with hydraulic shock absorbers Rear wheel mechanical self-adjusting drum Self-compensating, single point engagement Terra Trac 23 x 10.5 - 12 on Alloy Wheel Terra Trac 23 x 10.5 - 12 on Alloy Wheel Welded steel with DuraShield™ powder coat Injection molded TPO Injection molded TPO Fiberglass & Gelcoat Black Drive Train Transaxle Gear Selection Rear Axle Ratio Motor Shaft Direct Drive Noise & Vibration Differential with helical gears Dash Mounted Forward-Neutral-Reverse Noise Sound pressure; continued A-weighted equal to or less than 64 db(A) 14.7:1 Vibration, WBV Highest RMS value of weighted acceleration is less Vibration, HAV than 2.5 m/s2 Highest RMS value of weighted acceleration is less than 2.5 m/s2 The uncertainty of measurement is 0.46 m/s2 Some items shown may be optional equipment Measurement methods were applied per the ISO 2631 and ISO 5349 standards under conditions of typical vehicle surfaces. Specifications are subject to change without notice * Field installed accessories may require installation charges 2- 7