EVGA 132-YW-E179-TR User Guide - Page 16

place to store it.

Get EVGA 132-YW-E179-TR PDF manuals and user guides View all EVGA 132-YW-E179-TR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Be very careful when handling the CPU. Make sure not to bend or break any pins in the CPU socket. Hold the processor only by the edges and do not touch the bottom of the processor. Use the following procedure to install the CPU onto the motherboard. Unhook the socket lever by pushing down and away from the socket. Lift the load plate. There is a protective socket cover on the load plate to protect the socket when there is no CPU installed. Remove the protective socket cover from the load plate. Remove the processor from its protective cover, making sure you hold it only by the edges. It is a good idea to save the cover so that whenever you remove the CPU, you have a safe place to store it. Align the notches in the processor with the notches on the socket. Lower the processor straight down into the socket with out tilting or sliding it into the socket Align notches with notches on the CPU Make sure the CPU is fully seated and level in the socket. Close the load plate over the CPU and press down while you close and engage the socket lever.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Be very careful when handling the CPU. Make sure not to bend or break any pins
in the CPU socket. Hold the processor only by the edges and do not touch the
bottom of the processor.
Use the following procedure to install the CPU onto
the motherboard.
Unhook the socket lever by pushing
down
and
away
from the socket.
Lift the load plate. There is a protective socket
cover on the load plate to protect the socket
when there is no CPU installed.
Remove the protective socket cover from the load
plate.
Remove the processor from its protective cover,
making sure you hold it only by the edges.
It is a good idea to save the cover so that
whenever you remove the CPU, you have a safe
place to store it.
Align the notches in the processor with the
notches on the socket.
Lower the processor straight down into the socket
with out tilting or sliding it into the socket
Make sure the CPU is fully seated and level in the socket.
Close the load plate over the CPU and press down
while you close and engage the socket lever.
Align notches with
notches on the CPU