EVGA 200-LM-1700-KR Manual - Page 15
Connecting InterView to a PC
UPC - 843368010508
View all EVGA 200-LM-1700-KR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3.2Connecting InterView to a PC Before setting up InterView, you must power down your computer(s). 1. Connect the monitor to a computer(s) using the Dual DVI-I to DMS cable. Note: If you see 4 monitors please use the DVI-D adapter. 2. Know your computers display connections: DVI-I: You can plug the DVI-I to DMS cable straight into this port. If you are using an ATI graphics card please use the supplied adapter. VGA: You will need to use the supplied VGA to DVI-I adapter. Then plug the interview DVI-I cable into the adapter. 3. Prepare the power adapter: 15
15
3.2
Connecting InterView to a PC
Before setting up InterView, you must power down your computer(s).
1.
Connect the monitor to a computer(s) using the Dual DVI-I to DMS cable.
Note:
If you see 4 monitors please use the DVI-D adapter.
2.
Know your computers display connections:
3.
Prepare the power adapter:
DVI-I: You can plug the DVI-I to DMS
cable straight into this port.
If you are
using an ATI graphics card please use
the supplied adapter.
VGA: You will need to use the supplied
VGA to DVI-I adapter.
Then plug the
interview DVI-I cable into the adapter.