EVGA 200-LM-1700-KR Manual - Page 30

Picture is dim or bright  Perform monitor reset on "Factory Reset"  Auto Adjust via OSD (ON SCREEN DISPLAY)  Adjust brightness via OSD (ON SCREEN DISPLAY) Screen not centered correctly Screen has one or more lines Screen is scrambled or appears torn Monitor malfunctions on & off  Perform monitor reset on "Display Reset"  Auto Adjust via OSD (ON SCREEN DISPLAY)  Adjust brightness via OSD (ON SCREEN DISPLAY)  Ensure monitor is in proper video mode  Perform monitor reset on "Display Reset"  Auto Adjust via OSD (ON SCREEN DISPLAY)  Perform monitor self-test feature check and determine if these lines are also in self-test mode  Check for bent or broken pins  Perform monitor reset on "Display Reset"  Auto Adjust via OSD (ON SCREEN DISPLAY)  Perform monitor self-test feature check to determine if scrambled screen appears in self- test mode  Check for bent or broken pins  Boot up in the "safe mode"  Ensure monitor is in proper video mode  Ensure video cable connection to computer and to the flat panel is secure  Perform monitor reset on "Factory Reset"  Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode Picture missing color  Perform monitor self-test feature check  Check connection integrity at both end of the video cable  Check for bent or broken pins Faint shadow from the static image  Use the Power Management feature to turn off the monitor at all times when not in use displayed appears on the screen  Alternatively, use a dynamically changing screen saver 30