EVGA 680i User Guide - Page 34
Jumper Settings - bios
UPC - 843368000868
View all EVGA 680i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Jumper Settings The motherboard contains a 3-pin BIOS configuration jumper that enables all board configurations to be done in the BIOS Setup program. The silk screen on the motherboard shows a ∆ next to pin 1. Clear CMOS Jumper: CLR_CMOS The motherboard uses the CMOS RAM to store all the set parameters. The CMOS can be cleared by removing the CMOS jumper. Use the following procedure to clear CMOS: 1. Turn off the AC power supply and connect pins 1 and 2 together using the jumper cap. 2. Return the jumper setting to normal (pins 2 and 3. Together with the jumper cap). 4. Turn the AC power supply back on. 26
26
Jumper Settings
The motherboard contains a 3-pin BIOS configuration jumper that enables all
board configurations to be done in the BIOS Setup program.
The silk screen on the motherboard shows a
∆
next to pin 1.
Clear CMOS Jumper: CLR_CMOS
The motherboard uses the CMOS RAM to store all the set parameters. The
CMOS can be cleared by removing the CMOS jumper.
Use the following procedure to clear CMOS:
1.
Turn off the AC power supply and connect pins 1 and 2 together using the
jumper cap.
2.
Return the jumper setting to normal (pins 2 and
3.
Together with the jumper cap).
4.
Turn the AC power supply back on.