EdgeStar CWD1550S Owner s Manual - Page 14
Connect Drain Hose
View all EdgeStar CWD1550S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connect Drain Hose There are 3 setup options for connecting the drain hose. Please refer to the below options and determine which option is most suitable. Please consult with a certified plumber if you are unsure of how to proceed. Standpipe drain system - wall or floor (views A & B) - The standpipe drain requires a minimum diameter standpipe of 2" (50 mm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. The top of the standpipe must be at least 24" high and no higher than 39" from the bottom of the washer. Laundry tub drain system (view C) - The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 24" (610 mm) above the floor. IMPORTANT: Properly securing the drain hose will help eliminate leaks and the potential for water damage. Please consult with a certified plumber if you need assistance with this installation. Floor drain system (view D) - The floor drain setup requires that a siphon break be installed a minimum of 28" (710 mm) from the bottom of the washer. The siphon break kit along with any additional hoses must be purchased separately. 9