EdgeStar CWD1550S Owner s Manual - Page 15

Level the washer Properly leveling the appliance will help prevent excessive noise and vibration. Please install the appliance on a solid and level floor surface. If minor adjustments are needed, this machine is equipped with leveling legs that can be adjusted on each corner.  Before positioning the appliance in its final location, check first to see if the leveling legs are in their original position and tightened upwards towards the base of the cabinet. If not, loosen the locking nuts (as needed) and turn legs clockwise until in the upright position.  Position the appliance and apply pressure on each top corner to test for stability. If the unit is unstable, the legs will need to be adjusted.  To adjust the legs, loosen the locking nut with a wrench and adjust the legs by turning counter-clockwise until the foot of the leg comes in contact with the floor surface. Tighten the locking nut by hand and then with a wrench. Adjust each leg as necessary and test for stability by pressing down on each corner of the appliance. Use a carpenter's level to ensure that the appliance is level. Repeat above steps as necessary until appliance is stable and level. EdgeStar Combo Washer/Dryer 10