EdgeStar DEP701EW Owner's Manual - Page 14

Temperature sensor, Unit has an ES error

Page 14 highlights

Troubleshooting continued... My dehumidifier is leaking My dehumidifier runs for a little while and then it trips the power cord or the circuit breaker The control panel lights blink randomly Unit has an AS error Unit has an ES error Unit has a EC error Unit has a P2 error A drain hose has been attached and is loose Cracked water bucket The dehumidifier may be plugged into an outlet that can not supply the correct amount of current Unit may have a faulty control panel Humidity sensor error Temperature sensor error Unit malfunction Bucket is full Bucket is not correctly installed Secure the drain hose. Route your drain hose to a drain hole or condensate pump. Contact custom.er service. Contact an electrician if the unit works in a different room or circuit. Restart the unit, and if issue persists, contact customer service. Restart the unit, and if issue persists, contact customer service. Restart the unit, and if issue persists, contact customer service. Make sure the ambient temperature is suitable for the unit (41°F - 95°F). If not please operate the unit under the stated temperature. If the ambient temperature is suitable, please contact customer service. Empty the bucket and reinstall. Remove the bucket and reinstall. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

11
Troubleshooting
continued…
My dehumidifier is
leaking
A drain hose has been
attached and is loose
Secure the drain hose.
Route your drain hose
to a drain hole or
condensate pump.
Cracked water bucket
Contact custom.er
service.
My dehumidifier runs
for a little while and
then it trips the power
cord or the circuit
breaker
The dehumidifier may
be plugged into an
outlet that can not
supply the correct
amount of current
Contact an electrician
if the unit works in a
different room or
circuit.
The control panel lights
blink randomly
Unit may have a faulty
control panel
Restart the unit, and if
issue persists, contact
customer service.
Unit has an AS error
Humidity sensor error
Restart the unit, and if
issue persists, contact
customer service.
Unit has an ES error
Temperature sensor
error
Restart the unit, and if
issue persists, contact
customer service.
Unit has a EC error
Unit malfunction
Make sure the ambient
temperature is suitable
for the unit (41°F
95°F). If not please
operate the unit under
the stated
temperature.
If the ambient
temperature is suitable,
please contact
customer service.
Unit has a P2 error
Bucket is full
Bucket is not correctly
installed
Empty the bucket and
reinstall.
Remove the bucket
and reinstall.