EdgeStar WTC12001W Owner's Manual - Page 12
To operate in Fan, To operate in Dry, To Use Energy Saver Feature, To Use the Sleep Feature, To Use
View all EdgeStar WTC12001W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
In this mode the fan speed cannot be adjusted. It will start automatically at a speed according to the actual room temperature. To operate in Fan Only: Use this function only when cooling is not desired, such as for room circulation or to exhaust air (remember to open the vent). You can choose any speed you prefer. During this function the display will show the actual room temperature as in the cooling mode. In Fan only mode, the temperature is not adjusted. To operate in Dry Mode: In this mode, the air conditioner will operate as a dehumidifier. Because the conditioned space is a closed or sealed are some degree of cooling will continue. To Use Energy Saver Feature: This function is available on "Cool" mode, press Energy Saver . The fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature at which the compressor turns back on and cooling starts. To Use the Sleep Feature: At the time of sleep press the sleep button . In this mode the selected temperature will increase (cooling) or decrease (heating) by 2°F (1°C) 30 minutes after the mode is selected. The temperature will then increase (cooling) or decrease (heating) by another 2°F (1°C) after an additional 30 minutes. This new temperature will be maintained for 6 hours before it returns to the originally selected temperature. This ends the Sleep mode and the unit will continue to operate as originally programmed. The Sleep Mode program can be cancelled at any time during operation by again pressing the Sleep button. To Use Timer (Auto Start/Stop) Feature: When the unit is on or off, press the Timer button the "Timer On" indicator light illuminates. It indicates the Auto Start program is initiated. To switch to off press the Timer button again and the "Timer Off" indicator light illuminates. It indicates the Auto Stop program is initiated. Koldfront Through the Wall Air Conditioner 8