Edimax 3G-6200n Manual - Page 8
Front Panel - factory reset
View all Edimax 3G-6200n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
seconds and the router will reset itself to the factory default settings (warning: your original configurations will be replaced with the factory default settings) 5) Wireless on/off You can enable/disable WiFi wireless signal via switch button. Front Panel On the router's front panel there are LEDs, which shows the status of this router. Below is the list of each LED and its description. Figure 1.1 LED Light Status Description ON Router is powered on WAN LNK/ACT ON WAN is connected Off WAN is unconnected Flashing WAN port is sending / receiving data LAN LNK/ACT (Port 1-4) ON LAN port is connected Off LAN port is unconnected Flashing LAN port is sending / receiving data ON 3G USB modem is connected 3G Off 3G USB modem is not connected Flashing 3G USB modem card is sending / receiving data ON Wireless LAN has been activated Off Wireless LAN is disabled Flashing Wireless LAN is sending / receiving data 8