Edimax AR-7186WnA Manual - Page 43
Auto setup by ISP list, Bridge Mode
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
You may select Auto setup by ISP list, Dynamic IP Address, Static IP Address, PPPoE/PPPoA or Bridge Mode. 5.3.1. Auto setup by ISP list Select Auto setup by ISP list, click NEXT, and the page as shown in the following figure appears. The following table describes the parameters in this page: Field Description Country Select the country you are in. ISP Select your Internet Service Provider (ISP). Virtual path identifier (VPI) is the virtual path between two VPI points in an ATM network. Its valid value is between 0 and 255. Enter the correct VPI provided by your ISP. Virtual channel identifier (VCI) is the virtual channel between VCI two points in an ATM network. Its valid value is between 1 and 65535. Enter the correct VCI provided by your ISP. Connection Type Select a connection type from the dropdown list. You may select PPPoE/ PPPoA/ Dynamic IP/ Static IP/ Routered IP/ Bridge. 5.3.2. Bridge Mode Select Bridge Mode, click NEXT, and the page shown in the following figure will appear. 43