Edimax AR-7186WnA Manual - Page 68
Field, Description, TELNET, Multiple, Address Mapping for Multiple IP Service
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Field Description Application You can enter an application name, or select a name from the right drop-list menu like FTP or TELNET. Protocol Choose the transport layer protocol that the service type. You can choose ALL, TCP or UDP. Enter the specific start and end port number you want to Start/End forward. If it is only one port, enter the end port number the Port same as start port number. For example, if you want to set the Number FTP Virtual server, you can set the start and end port number to 21. Local IP Enter the IP Address for the Virtual Server in the LAN. Address In the NAT page, select Number of IPs as Multiple, and then choose IP Address Mapping (for Multiple IP Service), and the page shown in the following figure appears. The IP Address Mapping rule is per-VC based (only for Multiple IPs' VCs). Entries in this table allow you to configure one IP pool for specified source IP address from LAN, so that one packet whose source IP is in range of the specified address will select one IP address from the pool for NAT. 68