Edimax EW-7416APn V2 Manual - Page 15
II: System and Network Setup - troubleshooting
View all Edimax EW-7416APn V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter II: System and Network Setup 2-1 Installing the range extender/access point to your Network Please follow the following instruction to build the network connection between your new wireless range extender/access point and your computers, network devices: 1. Connect the range extender/access point to ADSL modem, router, or switch/hub in your network through the LAN port of the range extender/access point by Ethernet cable. 2. Connect the A/C power adapter to the wall socket, and then connect it to the 'Power' socket of the range extender/access point. 3. Please check all LEDs on the front panel. 'PWR' LED should be steadily on, LAN LEDs should be on if the range extender/access point is correctly connected to the ADSL modem, router or switch/hub. If PWD LED is not on, or any LED you expected is not on, please recheck the cabling, or jump to '4-2 Troubleshooting' for possible reasons and solution. 8