Edimax PS-1206U Manual - Page 65
Node ID: 0000B4010101 this implies Ethernet, address is 0000B4010101, IP address: 203.66.191.12,
View all Edimax PS-1206U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Lines should be indented with tabs. Where hostname is the device name of a print server, the ht=1 tag specifies the hardware type is Ethernet, the ha= tag specifies the Ethernet address of a print server, which is the Node ID located on the print server. The ha tag must be preceded by the ht tag. The ip= tag should correspond to the IP address you want to assign to the print server. For example, a print server with the following configuration: Node ID: 0000B4010101 (this implies Ethernet address is 0000B4010101), IP address: 203.66.191.12 The entry for this print server in the /etc/bootptab file should be: PS010101:\ :ht=1:\ :ha=0000B4010101:\ :ip=203.66.191.12: 55
55
Lines should be indented with tabs.
Where hostname is the device name of a print server, the
ht=1 tag specifies the hardware type is Ethernet, the ha=
tag specifies the Ethernet address of a print server, which
is the Node ID located on the print server. The ha tag
must be preceded by the ht tag. The ip= tag should
correspond to the IP address you want to assign to the
print server.
For example, a print server with the following
configuration:
Node ID: 0000B4010101 (this implies Ethernet
address is 0000B4010101),
IP address: 203.66.191.12
The entry for this print server in the /etc/bootptab file
should be:
PS010101:\
:ht=1:\
:ha=0000B4010101:\
:ip=203.66.191.12: