Edimax PT-31E Manual - Page 33
Method 2: USE PINCODE SETTING, Step 1, Step 2, Step 3, Step 4, Step 5, Step 6, IP Camera AP
View all Edimax PT-31E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Method 2: USE PINCODE SETTING Step 1: Power on the wireless AP and the wireless network camera. Wait for 1 minute for both devices to be up and running. Step 2: Open web browser and logo in wireless server. Go to wireless/WPS setting page. Step 3: Open web browser and logo in wireless network camera. Go to network/Wireless setting page. And find Wi-Fi Protected Setup (WPS) item. Step 4: Please find the pin Code on both setting page and key in it in each "Configure via Pin Code". Then push "Start PIN" button on page. . Step 5: Waiting for 30 seconds. When the network LED of the camera is blinking, WPS is successfully done. Step 6: If you have more than 1 camera, repeat step 2~5. IP Camera Page AP Setting Page 32
32
Method 2: USE PINCODE SETTING
Step 1:
Power on the wireless AP and the wireless network camera. Wait for 1 minute for
both devices to be up and running.
Step 2:
Open web browser and logo in wireless server. Go to wireless/WPS setting page.
Step 3:
Open web browser and logo in wireless network camera. Go to network/Wireless
setting page. And find Wi-Fi Protected Setup (WPS) item.
Step 4:
Please find the pin Code on both setting page and key in it
in each “Configure via Pin
Code”. Then push “Start PIN” button on page.
.
Step 5:
Waiting for 30 seconds. When the network LED of the camera is blinking, WPS is
successfully done.
Step 6:
If you have more than 1 camera, repeat step 2~5.
IP Camera Page
AP Setting Page