Edimax PT-31E Manual - Page 37
Video Setting
View all Edimax PT-31E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Shaprness Default Mirror Set all above values to default value '128'. Check 'Vertical' or 'Horizontal' box to flip the image vertically or horizontally, this will help to correct the orientation of image when IP camera is hanged bottom-up by camera holder. Power Line Frequency You can click both 'Vertical' and 'Horizontal' box at the same time. Select the frequency of power line of the place you're using this IP camera. This will help to reduce the flicker of certain lights in the image. When you finish with above settings, click 'Apply' button to save changes. 3-5-2 Video Setting You can adjust the video transfer parameters in this page. 36
36
Shaprness
Default
Set all above values to default value ‘128’.
Mirror
Check ‘Vertical’ or ‘Horizontal’ box to flip the image vertically or
horizontally, this will help to correct the orientation of image when
IP camera is hanged bottom-up by camera holder.
You
can click both ‘Vertical’ and ‘Horizontal’ box at the same time.
Power Line
Frequency
Select the frequency of power line of the place you’re using this IP
camera. This will help to reduce the flicker of certain lights in the
image.
When you finish with
above settings, click ‘Apply’ button to save changes.
3-5-2 Video Setting
You can adjust the video transfer parameters in this page.