Electrolux E23BC69SPS Complete Owners Guide English - Page 6

6 Installation Required Tools You will need the following tools: Tools Necessary: (OR) AND AND OR OR Phillips Head or Quadrex Head Screwdriver ⅜" and ¼" 6mm Socket Allen Wrench Wrench Adjustable ⅜" Fixed Wrench Wrench Components Provided: Top Hinge Cover Front Screw Top Hinge Cover Rear Screw Top Lower Hinge Hinge Screw Screw This Use & Care Guide provides general installation and operating instructions for your model. We recommend using a service or kitchen contracting professional to install your refrigerator. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps. Location • Choose a place that is near a grounded, non-GFCI, electrical outlet. Do Not use an extension cord or an adapter plug. • If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher, or other heat sources. • The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator. • Consider water supply availability for models equipped with an automatic ice maker. CAUTION DO NOT install the refrigerator where the temperature will drop below 55° F (13° C) or rise above 110° F (43° C). The compressor will not be able to maintain proper temperatures inside the refrigerator. DO NOT block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator.