Electrolux E23CS78HP Use and Care Guide - Page 7
Removing, The Doors
![]() |
View all Electrolux E23CS78HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Removing The Doors Getting Through Narrow Spaces If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors. Check first by measuring the entrance. Required Tools You will need the following tools: Tool_ Neces_er¢:: _D _ OR To prepare for removing the doors: 1 Make sure the electrical power cord is unplugged from the wall outlet. 2 Open both doors and remove the toe grille (as explained in the Installation Instructions that came with your appliance). 3 Remove any food from the door shelves. 4 Close the doors. To remove the refrigerator door: 1 Trace lightly around the door's top hinge with a pencil. This makes reinstallation easier. To remove the top hinge cover: 1 Remove the three screws from the cover over the top door hinges. 2 Pull the cover forward about a half-inch and lift it off. 2 Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it aside. Hinge Cover 3 Remove the two bottom hinge screws and hinge if necessary. To reinstall the refrigerator door, reverse the above steps. Once both doors are in place, also replace the top hinge cover.
![](/manual_guide/products/electrolux-e23cs78hp-use-care-guide-7c47363/7.png)