Electrolux E30GC74GPS Owners Guide - Page 10
Placement Of Burner Heads And Caps, Placement Of Burner Grates
UPC - 057112097992
View all Electrolux E30GC74GPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 Surface Cooking Placement of burner heads and caps Burner Cap Burner Head Gas Opening Burner Cap Electrode Burner Head Figure 1 Figure 2 For the 18 000 BTU burner : Place the burner head over the gas orifice (Figure 1). Be careful not to damage the electrode while placing the burner head over the orifice. Make sure electrode fits correctly into slot in burner head. For all burners : Place a burner cap on each burner head (see Figure 2), matching the cap size to the head size. The cap for each burner has an inner locating ring which centers the cap correctly on the burner head. Be sure that all the burner caps and burner heads are correctly placed BEFORE using your appliance. Make sure each burner cap is properly aligned and level. Turn the burner on to determine if it will light. If the burner does not light, contact a Service Center. Do not service the sealed burner yourself. PLACEMENT OF BURNER GRATES Place grates on the Ceramic Glass Cooktop. Be sure they are right located inside the stainless steel frame. ATTENTION: Do not slide the grates on the stainless steel frame, doing so can damage the surface.