Electrolux E30GC74GPS Owners Guide - Page 8
Using The Wok Stand - wok ring
UPC - 057112097992
View all Electrolux E30GC74GPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 Surface Cooking Figure 1 using the wok stand The Wok Stand provided with your cooktop is designed to allow round-bottomed woks to be used. It is recommended that you use a 14 inch diameter (35.5 cm) or less Wok. It is recommended that you use the right front POWER burner with the wok stand for best performance. If properly positioned, the Wok Stand will not slide off the grate. ! CAUTION Always use potholders to remove the wok stand from the grate. Allow the wok stand to cool before removing. Do not set hot wok stand on surfaces that cannot withstand high heat; such as countertops. Be sure the Wok Stand is positioned correctly and stable before use to prevent hot spills and possible burns. To Properly Position the Wok Stand: With the grate in position over the burner, set the Wok Stand on top of the grate positioning the notches in the Wok Stand over the cooktop grate fingers (See Figure 1). note The Wok cooking performance is best on the right front POWER burner position. ! CAUTION Be sure to ALWAYS use the Wok Stand if the stability of the wok is uncertain. If cooking large amounts of liquid food without the Wok Stand, the wok may tip and spill over causing burns. Flat-bottom woks with large flat bottoms may also be used on your cooktop Surface Burner Grates without the Wok Stand (See Figure 2). Insure the stability of the flat-bottom wok before cooking without the Wok Stand. If unstable, DO NOT use the flat-bottom wok without the Wok Stand. Round-bottom woks (with a support ring) should NOT be used (See Figure 3). The supporting ring was not designed for proper or stable use on the Surface Burner Grates. Proper use of flat-bottom wok on Surface Burner Grate Figure 2 Improper use of round-bottom wok on Surface Burner Grate Figure 3