Electrolux E30MH65GSS Installation Instructions - Page 10

Installation Instructions D. ALIGNING THE WALL PLATE Hole A Centerline notches Draw a Vertical Line on Wall from Center of Top Cabinet Horizontal Line Area E CAUTION: Wear gloves to avoid cutting fingers on sharp edges. CL Hole C Hole B Horizontal Line Draw a Horizontal line on wall from bottom of "Rear Wall Template". 1. Draw a Vertical line on the wall at the center of the 30" wide space. 2. Draw a Horizontal line on the wall at the bottom of "Rear Wall Template". 3. Drill 5/8" holes for toggle bolts on 3 locations (Hole A, Hole B, Hole C) but if the location of hole is same as that of stud, drill a 3/16" hole for wood screw. In other words, toggle bolt can not be used to the location of stud. NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. NOTE: Holes A, B and C are inside area E. If none of A, B and C is in a stud, find a stud somewhere in area E and draw a forth circle to line up with the stud. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the microwave. Set the mounting plate aside. 10