Electrolux E30SO75FPS Owners Guide - Page 33

Other Convenient Features 33 DEMONSTRATION MODE To demonstrate, touch Clock, the number 0 and touch START and hold for 3 seconds. DEMO ON will appear in the display. Cooking operations and specific special features can now be demonstrated with no power in the oven. For example, touch Add a Minute and the display will show 1.00 and count down quickly to END. To cancel, touch Clock, then the number 0 and STOP/CLEAR. If easier, unplug the oven from the electrical outlet and replug. AUTOMATIC COOKING TIME ADJUSTMENT The cooking results may slightly vary depending on room temperature, initial food temperature and other factors. You can adjust cooking results as you like. MORE / LESS TIME ADJUSTMENT BEFORE START Should you discover that you like any of the Automatic Cooking Options slightly more done, touch the Power Level once before START. The display will show MORE. Should you discover that you like any of the Automatic Cooking Options slightly less done, touch the Power Level twice before START. The display will show LESS. EXTEND DURING COOKING Add a Minute can be used to add up to 10 minutes during cooking. Touch Add a Minute repeatedly to extend cooking time in multiples of 1 minute. Carefully check the cooking doneness throughout the cooking time. EXTEND AT THE COOKING END When you open the door after the cooking, the display shows IF YOU NEED EXTRA TIME, ENTER COOKING TIME for 3 minutes. Enter the desired cooking time and touch START. You can add up to 9 min. 99 sec. Carefully check the cooking progress. Popcorn cannot have extended cooking time. Even if there are still unpopped kernels, do not add time. TIMER • Suppose you want to time a 3-minute long distance phone call. PROCEDURE 1. Touch Timer and number 1. 1 Timer Clock 2. Enter time. 300 3. Touch Timer again. Timer Clock MULTIPLE SEQUENCE COOKING The oven can be programmed for up to 4 cooking sequences for microwave only and 2 cooking sequences for convection. Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your oven can do this automatically. • Suppose you want to cook roast beef for 5 minutes at 100% and then continue to cook for 30 minutes at 50%. PROCEDURE 1. First touch Power Level once for 100% power. Then enter cooking time. 5 Power Level x 1 00 2. Touch Power Level 6 times for 50% power. Then enter second cooking time. 3 Power Level x 6 000 3. Touch START. START NOTE: 1. If Power Level is touched once, HIGH POWER will be displayed. 2. If you wish to know power level, simply touch Power Level. As long as your finger is touching Power Level, the power level will be displayed. 3. If multiple sequence cooking with convection, follow the CONVECTION COOKING procedure on page 17 two times before touching START.