Electrolux E30WV60PPS Complete Owner's Guide (English) - Page 6

6 Location requirements Location Requirements IMPORTANT: Observe all governing codes and ordinances. Have a qualified technician install the hood insert. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located behind the left filter on the rear wall of the hood insert. The range hood location should be away from strong draft areas, such as windows, doors and strong heating vents. Grounded electrical outlet is required. All openings in ceiling and wall where range hood will be installed must be sealed. For Mobile Home Installations The installation of this hood insert must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes. Product dimensions 2" " (6.5 cm) (1.0 cm) 7½" (19.0 cm) 2" (5.1 cm) 30" (76.2 cm) 36" (91.4 cm) 29 " (74.0 cm) 35 " (89.2 cm) 12" (30.5 cm) 10" (25.4 cm) 23" (58.4 cm) Serial Plate Location •• Remove the grease filters. •• The rating plate is located behind the filter by the electrical box.