Electrolux E32AF85PQS Complete Owners Guide English - Page 9

Door Removal & Temperature Control

Page 9 highlights

Door Removal & Temperature Control 9 Door Removal If door must be removed: CAUTION Doors are heavy. Two people are recommended to remove or replace the door assembly from the cabinet. • Unplug the unit or switch the breaker that supplies power to the unit to the off position. Hinge Cover • Remove the plastic top hinge cover. • Hold the door in place while removing the top hinge from the cabinet. Hinge Bolts (2) Hinge Plate • Remove the two ⅜" hex head bolts from the top hinge with a ⅜" wrench or socket. • Lift the door upwards and pull up and away from the cabinet until free of the bottom hinge pin mounted on the front of the cabinet. • To replace the door, reverse the above procedures and securely tighten all screws to prevent hinge slippage. Setting The Custom Set™ Electronic Control COOL DOWN PERIOD For safe food storage, allow 4 hours for the appliance to cool down completely. The unit will run continuously for the first several hours. CUSTOM SET™ ELECTRONIC CONTROL The Custom Set™ Electronic Control is located inside the appliance. Temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. To adjust the temperature setting, press the UP (+) key for warmer temperature and DOWN (-) key for colder temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments. The unit can be adjusted between -10°F (-23°C) and 10°F (-12°C).. By pressing the TEMP MODE key, the temperature display will toggle between °F to °C. To turn the appliance OFF, press the UP (+) key until the warmest temperature setting of 10°F (-12°C). show in the display. Then press the UP (+) key 3 times within 3 seconds to turn the unit OFF. The display will then scroll "OFF" across the display. To turn the unit back ON, press the DOWN key 3 times within 3 seconds. The control will then display "10°F (-12°C).)" and may be adjusted to the desired temperature.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

9
Door Removal & Temperature Control
Door Removal
If door must be removed:
CAUTION
Doors are heavy. Two people are recommended to remove or replace the door
assembly from the cabinet.
Unplug the unit or switch the breaker
that supplies power to the unit to the
off position.
Remove the plastic top hinge cover.
Hold the door in place while removing
the top hinge from the cabinet.
Remove the two
” hex head bolts
from the top hinge with a
” wrench
or socket.
Lift the door upwards and pull up
and away from the cabinet until free
of the bottom hinge pin mounted on
the front of the cabinet.
To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.
Hinge Cover
Hinge Bolts (2)
Hinge Plate
Setting The Custom Set™ Electronic Control
COOL DOWN PERIOD
For safe food storage, allow 4 hours for the appliance to cool down completely. The unit
will run continuously for the first several hours.
CUSTOM SET™ ELECTRONIC CONTROL
The Custom Set™ Electronic Control is located inside the appliance. Temperature is
factory preset to provide satisfactory food storage temperatures. However, the temperature
control is adjustable to provide a range of temperatures for your personal satisfaction.
To adjust the temperature setting, press the UP (+) key for warmer temperature and DOWN
(-) key for colder temperature on the control panel. Allow several hours for the temperature
to stabilize between adjustments. The unit can be adjusted between -10°F (-23°C) and
10°F (-12°C).. By pressing the TEMP MODE key, the temperature display will toggle
between °F to °C.
To turn the appliance OFF, press the UP (+) key until the warmest temperature setting of
10°F (-12°C). show in the display. Then press the UP (+) key 3 times within 3 seconds to
turn the unit OFF. The display will then scroll “OFF” across the display. To turn the unit back
ON, press the DOWN key 3 times within 3 seconds. The control will then display “10°F
(-12°C).)” and may be adjusted to the desired temperature.