Electrolux E48GC76EPS Installation Instructions - Page 21

Professional series Liquid Petroleum Gas (LPG) Conversion Kit Instructions Cooktop Models: E36GC76EPS, E48GC76EPS Model E36GC76EPS shown WARNING: This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer's instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion, or production of carbon monoxide may result causing property damage, personal injury, or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted appliance is checked as specified in the manufacture's instructions supplied with the kit. CAUTION: Before proceeding with the conversion, shut off the gas supply to the appliance prior to disconnecting the electrical power. Do not reconnect electrical power until all leak tests have been performed. Only a qualified service technician should convert or service this appliance. Be sure the unit is unplugged and cool before proceeding with the conversion. IMPORTANT: Read and save these instructions for future use and for use by the building inspector. The cooktop will not operate properly unless the correct sized orifices and air shutters are installed for each burner and valve and the air shutters for each burner are properly adjusted. The cooktop will not operate properly unless the regulator is converted according to these instructions. After installing the LPG orifices, be sure to keep the original factory installed orifices for future conversion back to natural gas. See page 12 for instructions on how to convert this appliance to natural gas from LPG. Part No. 100444 Rev. 3