Electrolux EFLS627UIW Installation Instructions English - Page 9
Removing shipping hardware, Installing hole plugs
View all Electrolux EFLS627UIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Unpacking Washer 9 Removing shipping hardware IMPORTANT Failure to remove shipping hardware completely could result in damage to the appliance, damage to your home, or unexpected washing results. Save all shipping bolts and spacers for future use. If the washer is to be transported at a later date, the shipping hardware must be reinstalled to help prevent shipping damage HOT Water Hose CALIENTE CHAUDE COLD Water Hose FRIA FROIDE Shipping Fork (on select models) White Spacer (on select models) P Clamps Black Spacers Shims Bolts For 300 Series: Remove all of the following: 4 BOLTS 4 SHIMS 4 BLACK SPACERS 3 P CLAMPS For 400, 500, and 600 Series: Remove all of the following: 5 BOLTS 5 SHIMS 4 BLACK SPACERS 4 P CLAMPS 1 WHITE SPACER 1 SHIPPING FORK NOTE Rubber expansion material on spacers may need time to relax before they can be easily pulled through shipping hole. Installing hole plugs HOT Water Hose CALIENTE CHAUDE COLD Water Hose FRIA FROIDE Locate hole plugs in the small bag sup- plied with washer instruction guides. Insert them in the holes in the washer back panel where the shipping hardware has been removed. x7