Electrolux EFME617STT Complete Owner s Guide English - Page 12

12 Operating Instructions Cycle Settings Drying Temperature The appropriate drying temperature will automatically be indicated for the cycle selected. To change the preset temperature, press the temp button to scroll to the desired setting. For best results Follow the fabric care label instructions on items to be dried. To protect your fabrics, not all temperatures are available with every cycle. If a temperature is not appropriate for the cycle, it cannot be selected and will not be lit by pressing the temp button. With exception of sanitize, the temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future. NOTE To change the temperature once the cycle has begun, press the pause button, make the new selection and press start again. sanitize (on select models) Recommended for durable fabrics and towels. Use this selection to remove harmful bacteria from your clothing or other items where sanitization is desired. This option will kill 99.9% of bacteria. A higher temperatures is required. Please check fabric care labels to prevent damage. high Recommended for most cotton fabrics. normal Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads. low Recommended for delicate fabrics. air dry This setting (no heat) should only be used with a time dry cycle to dry items containing feathers, down, foam rubber, plastics or rubber-like materials; to refresh clothing, stuffed animal, pillows or blankets; and to dust draperies. Dryness Level (Auto Dry) The appropriate dryness level will automatically be indicated when the cycle is selected. To change the preset level, press the dry level button to scroll to the degree of dryness desired. To protect your fabrics, not all dryness levels are available with every cycle. If a dryness level is not appropriate for the cycle, it cannot be selected and will not be lit by pressing the dry level button. The dryness level selected for the cycle will be remembered and recalled each time that cycle is selected in the future. NOTE To change the dryness level once the cycle has begun, press the pause button, make the new selection and press start again. Select the normal dryness level for most Auto Dry cycles. Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in the future, select high or max (on select models). For loads requiring less drying time, select less. Select damp for items you wish to partially dry before hanging or ironing.