Electrolux EFME617STT Complete Owner s Guide English - Page 18

Care & Cleaning

Page 18 highlights

18 Care & Cleaning WARNING To reduce risk of fire or serious injury to persons or property, comply with the basic warnings listed in the Important Safety Instructions and those listed below. ● Before cleaning the dryer drum interior, unplug the electrical power cord to avoid electrical shock hazards. ● Do not use any type spray cleanser when cleaning the dryer interior. Hazardous fumes or electrical shock could occur. Inside ● Clean the lint filter after every load. Lint buildup on the filter restricts air flow, which causes longer drying times. The filter is located at the bottom of the door opening. Remove by pulling straight up. Remove the lint and replace the filter. ● Occasionally a waxy build-up may form on the lint filter and/or moisture sensing bars from using dryer-added fabric softener sheets. To remove this build-up, wash them with warm, soapy water. Dry the filter thoroughly and replace. Do not operate the dryer without the lint filter in place. ● If the dryer drum becomes stained from noncolorfast fabrics, clean the drum with a damp cloth and a mild liquid household cleanser. Remove cleanser residue before drying the next load. ● Every 18 months a qualified servicer should clean the dryer cabinet interior, lint screen housing and exhaust duct. These areas can collect lint and dust over time. An excessive amount of lint build-up could result in inefficient drying and possible fire hazard. Outside ● Clean the cabinet with mild soap and water. Never use harsh, gritty or abrasive cleansers. ● If the cabinet becomes stained, clean with diluted chlorine bleach (1 part bleach to 8 parts water). Rinse several times with clear water. ● Remove glue residue from tape or labels with a mixture of warm water and mild detergent. Or, touch residue with the sticky side of the tape or label. ● When cleaning chrome parts use a window cleaner with ammonia or mild soap and water. ● Before moving the dryer, place a strip of cardboard or thin fiberboard under the front leveling legs to prevent damage to the floor. WARNING FIRE HAZARD A clothes dryer produces combustible lint. The dryer must be connected to an outdoors exhaust. Regularly inspect the outdoor exhaust opening and remove any accumulation of lint around the opening and in the surrounding area. IMPORTANT Clean lint screen after every load. IMPORTANT Do not store or place laundry products on top of dryer at any time. They can damage the finish or controls.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

18
Care & Cleaning
Before cleaning the dryer drum interior, unplug
the electrical power cord to avoid electrical
shock hazards.
Do not use any type spray cleanser when
cleaning the dryer interior. Hazardous fumes or
electrical shock could occur.
Inside
Clean the lint filter after every load. Lint build-
up on the filter restricts air flow, which causes
longer drying times. The filter is located at
the bottom of the door opening. Remove by
pulling straight up. Remove the lint and replace
the filter.
Occasionally a waxy build-up may form on
the lint filter and/or moisture sensing bars from
using dryer-added fabric softener sheets. To
remove this build-up, wash them with warm,
soapy water. Dry the filter thoroughly and
replace. Do not operate the dryer without the
lint filter in place.
If the dryer drum becomes stained from non-
colorfast fabrics, clean the drum with a damp
cloth and a mild liquid household cleanser.
Remove cleanser residue before drying the
next load.
Every 18 months a qualified servicer should
clean the dryer cabinet interior, lint screen
housing and exhaust duct. These areas can
collect lint and dust over time. An excessive
amount of lint build-up could result in ineffi
cient
drying and possible fire hazard.
Outside
Clean the cabinet with mild soap and water.
Never use harsh, gritty or abrasive cleansers.
If the cabinet becomes stained, clean with di-
luted chlorine bleach (1 part bleach to 8 parts
water). Rinse several times with clear water.
Remove glue residue from tape or labels with
a mixture of warm water and mild detergent.
Or, touch residue with the sticky side of the
tape or label.
When cleaning chrome parts use a window
cleaner with ammonia or mild soap and water.
Before moving the dryer, place a strip of
cardboard or thin fiberboard under the front
leveling legs to prevent damage to the floor.
IMPORTANT
Clean lint screen after every load.
WARNING
To reduce risk of fire or serious injury to persons
or property, comply with the basic warnings
listed in the Important Safety Instructions and
those listed below.
IMPORTANT
Do not store or place laundry products on top
of dryer at any time. They can damage the finish
or controls.
WARNING
FIRE HAZARD
A clothes dryer produces combustible lint.
The dryer must be connected to an outdoors
exhaust. Regularly inspect the outdoor exhaust
opening and remove any accumulation of lint
around the opening and in the surrounding area.