Electrolux EFME617STT Complete Owner s Guide English - Page 13

Operating Instructions Cycle Options Suitable options will automatically be indicated when the cycle is selected. To add an option, press options until the indicator for the desired option flashes, then press set. The indicator will be illuminated when the option has been selected. Follow the same steps to delete an option. To protect your fabrics, not all options are available with every cycle. If an option is not available for a cycle, the indicator will not light. Occasionally, two options or settings in the same cycle will conflict with each other, like eco option and sanitize temperature (on select models). When this happens, the option selected first will cause the conflicting option to not be selectable. NOTE To change the options once the cycle has begun, press the pause button, make the new selections and press start again. extended tumble (on select models) Select the extended tumble option if the dried load might not be removed promptly at the end of the cycle. The dried load will tumble continuously without heat for 30 minutes. A chime will sound periodically to remind you to remove the dried load. The wrinkle release option can be selected with extended tumble to increase the amount of time the load will tumble without heat up to 75 minutes. delay start Use delay start to select a drying time convenient to your schedule or during off-peak energy hours. The start of any cycle can be delayed for 30 minutes to 12 hours. Scroll through the options to select the delay start option, press set and then to scroll to the delayed desired time setting with the cycle selector. After choosing the desired delay time, press start and the delay time will begin counting down. NOTE While counting down during delay start, you will notice your dryer periodically tumbling for a few minutes without heat to redistribute the load, maximizing load freshness. perfect steamTM The perfect steamTM option injects steam into the clothing prior to cool down to reduce wrinkling, ironing and static cling. NOTE It is not recommended to use fabric softener sheets with steam cycles or steam options as it may cause staining on clothes. anti-static (on select models) The anti-static option injects steam into the clothing just before cycle completion to reduce static. wrinkle release The wrinkle release option helps prevent wrinkles and tangling by tumbling the dry load without heat for 5 minutes out of every 10 minutes. The 5 minutes on and 5 minutes off is repeated for a total 45 minutes. A chime will sound after every 5 minute tumble to remind you to remove the dried load. The extended tumble (if available) option can be selected with wrinkle release to increase the amount of time the load will tumble without heat for up to 75 minutes. lock To lock the controls between cycles, scroll to the lock option and press set. " " will be displayed on the panel. To unlock the controls scroll to the lock option and press set. Use this feature to reduce the likelihood of accidental operation by children. eco The eco option reduces the drying temperature a few degrees to save energy. In conjunction with automatic moisture sensors, cycle times will increase slightly, but overall energy usage will decrease. The symbol will be shown on the center display to indicate the eco option is activated. 13