Electrolux EI28BS55IB Use and Care Guide - Page 10
Removing, e Doors
View all Electrolux EI28BS55IB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Removing e Doors Getting through narrow spaces if your refrigerator will not fit through an entrance area, you can remove the doors, Check first by measuring the entrance. To remove the refrigerator doors: 1 Trace tightly around the door's top hinges with a pencil. This makes reinstallation easier, To prepare for removing the doors: Make sure the electrical power cord is unplugged from the wall outlet. 2 Open the freezer drawer and remove the toe grille (see "1nstallation" section). 3 Remove any food from the door shelves and close the doors, To remove the top hinge covers: 1 Remove the two (2) screws from each cover over the top door hinges, 2 Lift inside edge of hinge cover and tilt back. Disconnect the harness by grasping both sides of the connector firmly, depress the latch, and pull apart. Remove the two (2) screws from the top hinge, Lift the door off of the bottom hinge and set it aside. i Hi Mulll-v_ I I scr_ jzF'--....f I "%_b _"-. I1| "._,l,Qe NOTE DO NOT remove the ground screw from hinge. Detach the water tube from the connector located behind the refrigerator and pull the tube back out to the front of the unit, The connector releases when you press inward on the outer sleeve while pushing the tube toward the connector then while continuing to hold in the sleeve, pull the tube away.