Electrolux EI28BS55IB Use and Care Guide - Page 12

2 lnstallin Door andles Door Handle 1 Remove handles from protective packaging. 2 Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Alien set screws (C) with supplied Allen wrench, 4 Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door. 5 Position freezer handle end caps over left and right pre-installed shoulder bolts that are fastened to the door, ensuring the holes for the set screws are facing down. 6 While holding handle firmly against door; fasten left and right Allen set screws (C) with supplied Allen wrench, NOTE Mounting Refrigerator Handles oEnd Cap Mounting Freezer Handle To ensure that handles are flush with door, make sure that set screws are completely tightened.