Electrolux EI28BS55IB Use and Care Guide - Page 11

Doors

Page 11 highlights

Removin the Doors 1 1 NOTE You will be pulling approximately three (3) feet of water tube from the back of the refrigerator. 4 Unscrew the three (3) lower hinge screws and hinge if necessary. To reinstall the right door, reverse the above steps. Lower Hinge Removal 3 Lift drawer up and out to remove. CAUTION Drawer is heavy. Use caution when lifting. Installing Freezer Drawer 1 With lower slides and basket pulled out, mount drawer in reverse of removal. 2 Tighten drawer screws then turn another 1/4 turn. 3 Check gasket seal around freezer drawer. Make adjustments on drawer screws if necessary. L Once both doors are in place, ensure they are aligned with each other and level (Please see the "Installation" section for more details), and replace the top hinge cover. CAUTION Be sure doors are set aside in a secure position where they cannot fall and cause personal injury, or damage to the doors or handles. Removing Freezer Drawer 1 Open freezer drawer, 2 Remove drawer screws on right and left sides (two (2) screws on each side), i_ii _I _i _ NOTE DO NOT remove center screw from freezer drawer. This is a factory adjustment,

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

Removin
the
Doors
11
NOTE
You will be pulling approximately
three (3) feet of
water tube from the back of the refrigerator.
4
Unscrew the three (3) lower hinge screws and
hinge if necessary.
To reinstall the right door, reverse the above steps.
Lower Hinge Removal
L
Once both doors are in place, ensure they are aligned
with each other and level (Please see the "Installation"
section for more details), and replace the top hinge
cover.
CAUTION
Be
sure doors
are
set
aside
in
a
secure position
where
they
cannot
fall and cause
personal
injury,
or
damage
to the
doors or
handles.
Removing
Freezer
Drawer
1
Open freezer drawer,
2
Remove drawer screws on right and left sides
(two (2) screws on each side),
i_ii
_I
_i
_
3
Lift drawer
up and out to remove.
CAUTION
Drawer is
heavy.
Use
caution
when
lifting.
Installing
Freezer
Drawer
1
With lower slides and basket pulled out, mount
drawer in reverse of removal.
2
Tighten drawer screws then turn another
1/4 turn.
3
Check gasket seal around freezer drawer.
Make
adjustments
on drawer screws if necessary.
NOTE
DO NOT remove center screw from freezer drawer.
This is a factory adjustment,