Electrolux EI30EW35KW Product Specifications Sheet (English) - Page 7

Electric Cooktop Installation Over 30"/27" Electric Single Wall Oven For all approved electric cooktop models, cut minimum 4" x 4" opening in right cabinet side panel and/or filler panel, to route armoured cable to junction box Side filler panels necessary to isolate oven from adjoining cabinets. Panel height may need to be modified to accommodate the depth of approved electric cooktop models Electric Single Wall Oven Cutout For models: EW30EW55G, EI30EW35J, EW27EW55G & EI27EW35J Cooktop cutout** Approx. 3" Approx. 3" 23 1/2 min.* 240 /208V Junction box for wall oven A 240 /208V Junction box for electric cooktop Oven cutout 36" min. 27 1/4" min. 28 1/4" max. 24" min. cutout depth Install 3/4" full plywood base on 2 runners, flush with toe plate, capable of supporting 200 lbs. (30" models) and 150 lbs. (27" models) Unit will overlap cutout (minimum) edges by 1" 4-1/2" maximum height allowed from oven base to floor if cooktop is installed directly over wall oven. To route armored cable to junction box through left cabinet side panel and/or filler panel, cut minimum 4" x 4" opening in wood base and runner (5" maximum height allowed with no cooktop.) *Critical dimension - MUST be applied **For cooktop cutout dimensions refer to model-specific product page or installation guide on web Cutout Width (A) 30" Wall 28 1/2" min. Oven 29" max. 27" Wall 24 7/8" min. Oven 25 1/4" max. 30" & 27" Electric Single Wall Ovens Under-Counter Installation Specifications • Product Weights - (EW30EW55G and EI30EW35J) 200 Lbs. / (EW27EW55G and EI27EW35J) 150 Lbs. • Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line. • Connected Load (kW Rating) @ 240 / 208 Volts = (30") 4.0 / 3.0 kW / (27") 3.4 / 2.6 kW • Amps @ 240 / 208 Volts = (30") 17.0 / 14.5 Amps / (27") 14.2 / 12.6 Amps • Recommended Circuit Breaker - 20 Amps • Always consult local and national electric codes. • Minimum 21" clearance for oven door depth when open. • Minimum 23-1/2" deep cutout dimension is critical for proper installation, to ensure that oven's faceplate will fit flush against cabinet front. • Full oven base of solid plywood or similar material required, capable of supporting 200 Lbs. (30" models) or 150 Lbs. (27" models). Install over two runners and flush with toe plate. • Base must be level and cabinet front must be square. • Allow 5" maximum height from oven base to floor, if NO cooktop is installed directly over wall oven. Electric Cooktop Installation Over 30" / 27" Electric Single Wall Oven Specifications Electrolux Single Wall Oven models EW30EW55G, EI30EW35J, EW27EW55G and EI27EW35J are approved to be used beneath Electrolux cooktop models EW36EC55G, EW30EC55G, EW36IC60I, EW30IC60I, EW36CC55G and EW30CC55G. For detailed Electric or Induction Hybrid Cooktop installation, refer to model-specific product page and installation guide on web. • Side filler panels necessary to isolate oven from adjoining cabinets. Panel height may need to be modified to accommodate the depth of approved electric cooktop models. • To route armored cable to junction box, cut minimum 4" x 4" opening in right cabinet side panel. • Allow 4-1/2" maximum height from oven base to floor, if cooktop is installed directly over wall oven. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions. Electrolux Major Appliances, N.A. USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca EC_EW INST EL 10/10 © 2010 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.