Electrolux EI33AR80WS Trim Kit Installation Instructions English - Page 16

16 Instructions for Single Installation Trim Kits: TRMKTEZ1FL79 (Frigidaire) TRMKTSS1LV84 (Electrolux) CAUTION Appliances are heavy. Installation requires two people. Leveling System Installation 1. a. Lay the unit on its back on packing material or a drop cloth to prevent damage and protect the floor. b. Remove both rear leg levelers by unscrewing counterclockwise (Fig. 1A), A B and store them with your Product Literature. c. Remove both front leg levelers by unscrewing the outer peg and 2 bolts on each front leveler with a 5/16" nut Fig. 1 driver. Remove the hinge cover if it is installed (Fig 1B), and store them with your Product Literature. 2. Lay the parts out on a cleared area face down. Be sure to place a drop cloth Fig. 2 over the floor to prevent scratching the trim kit and/or floor (Fig. 2). 3. a. Fit the first Leveler Assembly onto a refrigerator/freezer (Fig. 3). INSTRUCTION SHEET c Using the 4H bolts from step 1, fasten the front of the Leveler Assembly to the refrigerator/freezer using a 5/16" nut driver (Fig. 5). For steps 3b and 3c, if you need more space for the nut driver clearance, rotate the bolt labeled "F" clockwise (Fig. 6) using a flathead screwdriver or a 3/8" socket wrench. Fig. 5 d. Attach the remaining Leveler Assembly as described in the previous 3 steps. With the unit still on its back, adjust all leveling wheels to approximately the orientation in Fig. 7. Fig. 6 Fig. 7 b. Using a 5H bolt and a power drill, fasten the bottom of the Leveler Assembly with a 3/8" hex drill bit in whichever hole overlaps the screw hole (Fig. 4). Note: The rear of the bracket is contoured to slip over the metal compressor base. Driving the rear bolt first will ensure proper alignment of the lever assembly. Fig. 3 Fig. 4 ©2021 Electrolux Home Products, Inc. Instruction Sheet A00343906 9.30.21