Electrolux EI36DD10KS Complete Owner's Guide (English) - Page 17

Solutions to Common Problems 17 Before you call Problem Solution Telescoping Vent does not fully raise Blower does not turn on - Check for and remove obstructions. The telescoping vent is designed to tilt and stop with obstructions. The raise/lower push button will reverse direction of travel and reset the telescoping vent travel. Allow the telescoping vent to fully raise or lower after encountering an obstruction. - If the telescoping vent does not response to the raise/lower push button, it can be straightened or helped along by hand and the switch should be tried again. - DO NOT attempt to lubricate the telescoping vent. It is factory lubricated for life. - Make sure telescoping vent is in the upper most position. - Make sure the blower slide adjustment is not in the off position. - If used for an extended period of time, allow the blower to cool. The blower is thermally protected and will shut off until cooled sufficiently. It will resume normal operation when cool. Questions or for service call: 1-877-4ELECTROLUX (1-877-435-3287)